Fire door frames in Aston: what's involved
From the B6 postcode district outwards, we take on fire door frames across Aston for homes, blocks and workplaces.
Aston has a broad mix of buildings, including family homes after loft conversions, small blocks of flats and houses with integral garages, and the same fire door principles apply to all of them.
Frame-to-wall gaps on Aston jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Aston survey.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
What you get:
- Assessment of frame condition and compatibility
- Hardwood or certified frames to suit the door
- Frame-to-wall gap sealing with evidenced materials
- Fixing at specified centres with packing
Fire door law for Aston properties
England's framework applies in Aston. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Aston, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Aston need fire door frames?
The need for fire door frames usually arises in converted houses or older blocks of flats, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Aston to keep escape routes protected throughout.
How a Aston job runs
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Aston?
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Aston building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Aston and nearby
Aston is about 2.3 km from Birmingham, and we cover both, along with nearby Washwood Heath and Smethwick. Send us your postcode and we'll confirm survey dates.
Questions
Do you cover B6 and nearby postcodes?
Yes. We cover Aston including B6, and nearby towns such as Birmingham and Washwood Heath. The survey and written quote are free.
Can you work from an existing inspection report for my Aston building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.