Fire door frames in Birmingham, done to the evidence
Looking for fire door frames in Birmingham? We supply and fit certified fire doors and components across Birmingham and the wider West Midlands area, working from a free survey and a fixed written quote.
Fire doors in Birmingham protect escape routes in hotels, shared houses and converted flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Birmingham survey. Frame-to-wall gaps on Birmingham jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
BS 8214:2026 and the frame-to-wall gap
The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.
Each installation includes:
- Architraves and making good
- Assessment of frame condition and compatibility
- Fixing at specified centres with packing
- Photographs of fixing and sealing before covering
Which fire door rules apply in Birmingham?
The rules that apply to fire doors in Birmingham are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Birmingham block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Birmingham
Typical settings for fire door frames include schools, converted houses and older blocks of flats. In Birmingham, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Birmingham
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Birmingham?
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Birmingham and nearby
Beyond Birmingham itself we also cover nearby towns such as Aston (2.3 km), Smethwick and Washwood Heath. The service, pricing and evidence are the same wherever you are.
Questions from Birmingham
Do you cover B3 and nearby postcodes?
Yes. We cover Birmingham including B3, and nearby towns such as Aston and Smethwick. The survey and written quote are free.
What happens on a survey in Birmingham?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.

