Fire door frames for Brierley Hill buildings
Our fire door frames service covers Brierley Hill and the wider West Midlands area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Brierley Hill range from small blocks of flats to care homes and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Frame-to-wall gaps on Brierley Hill jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Brierley Hill survey.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
Each installation includes:
- Photographs of fixing and sealing before covering
- Architraves and making good
- Assessment of frame condition and compatibility
- Hardwood or certified frames to suit the door
Rules and responsibilities in Brierley Hill
The rules that apply to fire doors in Brierley Hill are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Brierley Hill block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where fire door frames fit in Brierley Hill
Landlords, managing agents, facilities teams and homeowners in Brierley Hill can all commission fire door frames from us. The usual settings are offices and converted houses, though single doors for older blocks of flats are just as welcome.
Our process in Brierley Hill
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Brierley Hill
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Brierley Hill building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Brierley Hill and nearby
Neighbouring towns such as Stourbridge, Dudley, Kingswinford and Halesowen are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you work in Brierley Hill?
Yes, we take on fire door frames in Brierley Hill and the surrounding area, including Stourbridge and Dudley. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Brierley Hill building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.