Fire door frames in Wednesfield, done to the evidence
When you book fire door frames in Wednesfield, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Wednesfield range from light industrial buildings to care homes and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Frame-to-wall gaps on Wednesfield jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Wednesfield survey.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
As standard, the work covers:
- Frame-to-wall gap sealing with evidenced materials
- Architraves and making good
- Assessment of frame condition and compatibility
- Photographs of fixing and sealing before covering
What the rules say for Wednesfield
The rules that apply to fire doors in Wednesfield are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Wednesfield block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Wednesfield need fire door frames?
You are most likely to need fire door frames if you look after schools, offices or older blocks of flats. Whatever the building in Wednesfield, we survey each opening and tell you which doors need work and which do not.
The steps on a Wednesfield installation
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Wednesfield
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Wednesfield and neighbouring towns
Nearby towns we cover include Willenhall, Wolverhampton and Bloxwich. Distance from Wednesfield does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover WV11 and nearby postcodes?
Yes. We cover Wednesfield including WV11, and nearby towns such as Willenhall and Wolverhampton. The survey and written quote are free.
How quickly can you survey in Wednesfield?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.