Riser and cupboard fire doors for Deal buildings
Looking for riser and cupboard fire doors in Deal? We supply and fit certified fire doors and components across Deal and the wider Kent area, working from a free survey and a fixed written quote.
Buildings in and around Deal range from schools to small blocks of flats and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Riser and meter cupboard doors in Deal blocks are easy to overlook until an inspection flags them. We match riser doors in Deal to the rating of the riser enclosure, not to whatever was there before.
Closer or lock?
Doors on stores and risers that are kept locked shut usually do not need a self-closer, as long as the strategy allows it and the door is marked accordingly. Doors that are used regularly, such as cleaner's stores, usually do. We follow the fire strategy and the risk assessment for each opening.
As standard, the work covers:
- Record of any fire stopping concerns found
- Single and double flush configurations
- Fire-rated riser and cupboard doorsets
- Seals and frame gap sealing
The regulations behind fire doors in Deal
The rules that apply to fire doors in Deal are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Deal block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where riser and cupboard fire doors fit in Deal
You are most likely to need riser and cupboard fire doors if you look after hotels, office buildings or blocks of flats. Whatever the building in Deal, we survey each opening and tell you which doors need work and which do not.
How a Deal job runs
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Guide prices in Deal
As a guide, budget £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. The figure for your Deal building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Deal and nearby
Nearby towns we cover include Dover, Ramsgate and Broadstairs. Distance from Deal does not change our guide prices, and the survey and quote are free.
Common questions
Do you work in Deal?
Yes, we take on riser and cupboard fire doors in Deal and the surrounding area, including Dover and Ramsgate. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Deal building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.