FD60 fire doors in Washington

FD60 fire doors for Washington buildings

We provide FD60 fire doors in Washington (NE38 and the surrounding postcodes), from the first survey through to a documented handover.

Washington has a broad mix of buildings, including industrial estates, houses with integral garages and high-street shops, and the same fire door principles apply to all of them.

FD60 openings in Washington buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Washington we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

What you get:

• Check of the fire strategy rating for each opening
• Load-rated hinges and correctly powered closer
• Certified FD60 doorset or leaf with matching evidence
• 60-minute glazing systems where vision panels are needed

Which fire door rules apply in Washington?

England's framework applies in Washington. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Washington, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Buildings and duty holders in Washington

The need for FD60 fire doors usually arises in stair cores in taller blocks or plant and boiler rooms, and sometimes refuse stores. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Washington to keep escape routes protected throughout.

The steps on a Washington installation

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Washington?

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Washington building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Washington and nearby

Nearby towns we cover include Chester-le-Street, Felling and Houghton-Le-Spring. Distance from Washington does not change our guide prices, and the survey and quote are free.

Common questions