Fire door hold-open devices in Washington, done to the evidence
Our fire door hold-open devices service in Washington is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
In and around Washington, fire door work covers everything from HMOs to low-rise blocks of flats. We plan each job around the people who use the building.
Free-swing closers suit Washington settings where residents or pupils find doors hard to open. Where doors in Washington care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
As standard, the work covers:
- Record of devices and test results
- Electromagnetic holders to BS EN 1155
- Assessment of door use and alarm system
- Coordination of alarm interface
Which fire door rules apply in Washington?
England's framework applies in Washington. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Washington, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs fire door hold-open devices in Washington?
You are most likely to need fire door hold-open devices if you look after offices, schools or clinics. Whatever the building in Washington, we survey each opening and tell you which doors need work and which do not.
The steps on a Washington installation
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Guide prices in Washington
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Washington building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Washington
We also cover towns near Washington, including Chester-le-Street (5.9 km away), Felling and Houghton-Le-Spring. If your building is in NE38 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover NE38 and nearby postcodes?
Yes. We cover Washington including NE38, and nearby towns such as Chester-le-Street and Felling. The survey and written quote are free.
Can you work from an existing inspection report for my Washington building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.