Fire door closers for Washington buildings
Looking for fire door closers in Washington? We supply and fit certified fire doors and components across Washington and the wider Tyne and Wear area, working from a free survey and a fixed written quote.
Washington has a broad mix of buildings, including high-street shops, houses with integral garages and family homes after loft conversions, and the same fire door principles apply to all of them.
Free-swing closers are a practical option for Washington care homes and supported living. A closer that fails to latch the door is one of the first things we put right on Washington fire doors.
Setting a closer properly
Closers have adjustments for closing speed, latching action and often backcheck. We set them so the door closes from any angle and engages the latch, without slamming. In England, Approved Document M guidance on opening force, no more than 30N for the first 30 degrees and 22.5N from 30 to 60 degrees at the leading edge, is a useful benchmark for usability. Our closers guide has more detail.
What you get:
- Adjustment of speed, latching and backcheck
- Close-and-latch test from full open
- Overhead, concealed or free-swing options
- Record of model and settings
The regulations behind fire doors in Washington
The rules that apply to fire doors in Washington are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Washington block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where fire door closers fit in Washington
Landlords, managing agents, facilities teams and homeowners in Washington can all commission fire door closers from us. The usual settings are blocks of flats and offices, though single doors for HMOs are just as welcome.
The steps on a Washington installation
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
What does fire door closers cost in Washington?
Budget around £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT for fire door closers. Our guide prices are the same in Washington as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Washington and nearby
Washington is about 10.2 km from Newcastle upon Tyne, and we cover both, along with nearby Chester-le-Street and Felling. Send us your postcode and we'll confirm survey dates.
Questions
Do you work in Washington?
Yes, we take on fire door closers in Washington and the surrounding area, including Chester-le-Street and Felling. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Washington?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do all fire doors need closers?
Most do. Exceptions include some doors kept locked shut and some doors within houses, depending on the fire strategy.
Why won't my fire door latch?
Usually the closer is out of adjustment or under-powered, or the latch and keep are misaligned. Both are normally quick to fix.