FD60 fire doors in Gateshead, NE8

What FD60 fire doors in Gateshead should include

From the NE8 postcode district outwards, we take on FD60 fire doors across Gateshead for homes, blocks and workplaces.

Fire doors in Gateshead protect escape routes in houses with integral garages, care homes and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.

For FD60 work in Gateshead we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Gateshead buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• Frame fixing and structural gap sealing recorded with photos
• 60-minute glazing systems where vision panels are needed
• Load-rated hinges and correctly powered closer
• Check of the fire strategy rating for each opening

The regulations behind fire doors in Gateshead

England's framework applies in Gateshead. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Gateshead, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Which buildings in Gateshead need FD60 fire doors?

The need for FD60 fire doors usually arises in refuse stores or stair cores in taller blocks, and sometimes plant and boiler rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Gateshead to keep escape routes protected throughout.

The steps on a Gateshead installation

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Gateshead?

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Gateshead building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Gateshead and nearby

Gateshead is about 1.5 km from Newcastle upon Tyne, and we cover both, along with nearby Felling and Gosforth. Send us your postcode and we'll confirm survey dates.

Common questions