FD60 fire doors in Felling, NE10

Getting FD60 fire doors right in Felling

Our FD60 fire doors service in Felling is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Buildings in and around Felling range from light industrial buildings to family homes after loft conversions and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

FD60 openings in Felling buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Felling building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

As standard, the work covers:

• Frame fixing and structural gap sealing recorded with photos
• Certified FD60 doorset or leaf with matching evidence
• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer

Fire door law for Felling properties

England's framework applies in Felling. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Felling, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD60 fire doors fit in Felling

Landlords, managing agents, facilities teams and homeowners in Felling can all commission FD60 fire doors from us. The usual settings are stair cores in taller blocks and plant and boiler rooms, though single doors for refuse stores are just as welcome.

Our process in Felling

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Budgeting for FD60 fire doors in Felling

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Felling building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Felling

Neighbouring towns such as Gateshead, Newcastle upon Tyne, Hebburn and Wallsend are covered too, so clients with several buildings can use one installer and one evidence format.

Questions