FD60 fire door installation in Catford

FD60 fire doors in Catford, done to the evidence

If you need FD60 fire doors in Catford, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

In and around Catford, fire door work covers everything from clinics to restaurants. We plan each job around the people who use the building.

For FD60 work in Catford we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Catford buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

Each installation includes:

• Load-rated hinges and correctly powered closer
• Intumescent and smoke seals as specified
• Frame fixing and structural gap sealing recorded with photos
• Check of the fire strategy rating for each opening

Fire door law for Catford properties

In Catford, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet. In London, the London Fire Brigade is the enforcing authority for fire safety law.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Catford building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Buildings and duty holders in Catford

The need for FD60 fire doors usually arises in plant and boiler rooms or refuse stores, and sometimes mixed-use commercial buildings. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Catford to keep escape routes protected throughout.

The steps on a Catford installation

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Catford?

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Catford building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Catford and neighbouring towns

Nearby towns we cover include Blackheath, Greenwich and Beckenham. Distance from Catford does not change our guide prices, and the survey and quote are free.

Questions from Catford