FD60 fire doors for New Malden buildings
For property owners, landlords and managing agents in New Malden, we offer FD60 fire doors with one team for the survey, the product and the installation.
Buildings in and around New Malden range from hotels to care homes and clinics. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
FD60 openings in New Malden buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in New Malden we generally fit certified doorsets, so frame and leaf share the same test evidence.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
As standard, the work covers:
- Certified FD60 doorset or leaf with matching evidence
- Frame fixing and structural gap sealing recorded with photos
- Intumescent and smoke seals as specified
- Check of the fire strategy rating for each opening
Which fire door rules apply in New Malden?
England's framework applies in New Malden. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. Enforcement of fire safety law in New Malden sits with the London Fire Brigade.
For blocks over 11 metres in New Malden, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where FD60 fire doors fit in New Malden
From plant and boiler rooms to refuse stores, the requirement for FD60 fire doors in New Malden comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
How a New Malden job runs
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in New Malden
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in New Malden as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
New Malden and neighbouring towns
Nearby towns we cover include Surbiton, Morden and Wimbledon. Distance from New Malden does not change our guide prices, and the survey and quote are free.
Questions from New Malden
Do you cover KT3 and nearby postcodes?
Yes. We cover New Malden including KT3, and nearby towns such as Surbiton and Morden. The survey and written quote are free.
What happens on a survey in New Malden?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.

