FD60 fire doors in Hailsham, BN27

Getting FD60 fire doors right in Hailsham

Our FD60 fire doors service in Hailsham is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Around Hailsham, small offices, family homes after loft conversions and small blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

Before ordering FD60 doors for a Hailsham building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Hailsham we generally fit certified doorsets, so frame and leaf share the same test evidence.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

As standard, the work covers:

• Load-rated hinges and correctly powered closer
• Check of the fire strategy rating for each opening
• 60-minute glazing systems where vision panels are needed
• Intumescent and smoke seals as specified

Rules and responsibilities in Hailsham

England's framework applies in Hailsham. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Hailsham, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Which buildings in Hailsham need FD60 fire doors?

The need for FD60 fire doors usually arises in refuse stores or stair cores in taller blocks, and sometimes plant and boiler rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Hailsham to keep escape routes protected throughout.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Hailsham?

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Hailsham building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Nearby areas we cover from Hailsham

Nearby towns we cover include Eastbourne, Seaford and Bexhill-on-Sea. Distance from Hailsham does not change our guide prices, and the survey and quote are free.

Common questions