FD60 fire door installation in Sandhurst

FD60 fire doors in Sandhurst: what's involved

Our FD60 fire doors service in Sandhurst is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Buildings in and around Sandhurst range from light industrial buildings to small blocks of flats and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

FD60 openings in Sandhurst buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Sandhurst we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

What you get:

• Frame fixing and structural gap sealing recorded with photos
• Load-rated hinges and correctly powered closer
• Check of the fire strategy rating for each opening
• 60-minute glazing systems where vision panels are needed

Which fire door rules apply in Sandhurst?

England's framework applies in Sandhurst. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Sandhurst, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Which buildings in Sandhurst need FD60 fire doors?

The need for FD60 fire doors usually arises in mixed-use commercial buildings or stair cores in taller blocks, and sometimes plant and boiler rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Sandhurst to keep escape routes protected throughout.

The steps on a Sandhurst installation

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Sandhurst?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Sandhurst and neighbouring towns

Nearby towns we cover include Crowthorne, Yateley and Camberley. Distance from Sandhurst does not change our guide prices, and the survey and quote are free.

Common questions