FD60 fire doors in Newbury: what's involved
Our FD60 fire doors service in Newbury is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
In and around Newbury, fire door work covers everything from houses with integral garages to small offices. We plan each job around the people who use the building.
FD60 openings in Newbury buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Newbury building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
What you get:
- Frame fixing and structural gap sealing recorded with photos
- Intumescent and smoke seals as specified
- 60-minute glazing systems where vision panels are needed
- Load-rated hinges and correctly powered closer
The regulations behind fire doors in Newbury
Fire doors in Newbury fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Newbury above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where FD60 fire doors fit in Newbury
Typical settings for FD60 fire doors include stair cores in taller blocks, refuse stores and plant and boiler rooms. In Newbury, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Newbury
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Newbury
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Newbury building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Newbury and neighbouring towns
Newbury is about 25.3 km from Reading, and we cover both, along with nearby Thatcham and Basingstoke. Send us your postcode and we'll confirm survey dates.
Questions from Newbury
Do you cover RG14 and nearby postcodes?
Yes. We cover Newbury including RG14, and nearby towns such as Thatcham and Basingstoke. The survey and written quote are free.
What happens on a survey in Newbury?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.

