What FD60 fire doors in Lower Earley should include
When you book FD60 fire doors in Lower Earley, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Fire doors in Lower Earley protect escape routes in schools, small blocks of flats and small offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.
FD60 openings in Lower Earley buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Lower Earley building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
As standard, the work covers:
- 60-minute glazing systems where vision panels are needed
- Frame fixing and structural gap sealing recorded with photos
- Check of the fire strategy rating for each opening
- Load-rated hinges and correctly powered closer
What the rules say for Lower Earley
In Lower Earley, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Lower Earley building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Lower Earley
Typical settings for FD60 fire doors include stair cores in taller blocks, mixed-use commercial buildings and plant and boiler rooms. In Lower Earley, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Lower Earley
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Lower Earley
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Lower Earley and neighbouring towns
Neighbouring towns such as Reading, Wokingham, Crowthorne and Yateley are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you cover RG6 and nearby postcodes?
Yes. We cover Lower Earley including RG6, and nearby towns such as Reading and Wokingham. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.

