FD60 fire doors: our service in Reading
For property owners, landlords and managing agents in Reading, we offer FD60 fire doors with one team for the survey, the product and the installation.
Around Reading, schools, purpose-built blocks of flats and student accommodation all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
FD60 openings in Reading buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Reading building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
Each installation includes:
- Certified FD60 doorset or leaf with matching evidence
- Load-rated hinges and correctly powered closer
- 60-minute glazing systems where vision panels are needed
- Frame fixing and structural gap sealing recorded with photos
The regulations behind fire doors in Reading
The rules that apply to fire doors in Reading are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Reading block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Reading need FD60 fire doors?
The need for FD60 fire doors usually arises in mixed-use commercial buildings or plant and boiler rooms, and sometimes refuse stores. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Reading to keep escape routes protected throughout.
Our process in Reading
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Reading
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Reading building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Reading
Beyond Reading itself we also cover nearby towns such as Lower Earley (4.8 km), Wokingham and Crowthorne. The service, pricing and evidence are the same wherever you are.
Questions from Reading
Do you work in Reading?
Yes, we take on FD60 fire doors in Reading and the surrounding area, including Lower Earley and Wokingham. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Reading?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.