FD60 fire doors in Thatcham

FD60 fire doors in Thatcham: what's involved

Looking for FD60 fire doors in Thatcham? We supply and fit certified fire doors and components across Thatcham and the wider Berkshire area, working from a free survey and a fixed written quote.

Thatcham has a broad mix of buildings, including family homes after loft conversions, care homes and small blocks of flats, and the same fire door principles apply to all of them.

FD60 openings in Thatcham buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Thatcham we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

Each installation includes:

• Check of the fire strategy rating for each opening
• 60-minute glazing systems where vision panels are needed
• Frame fixing and structural gap sealing recorded with photos
• Certified FD60 doorset or leaf with matching evidence

Which fire door rules apply in Thatcham?

Fire doors in Thatcham fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Thatcham above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Thatcham

The need for FD60 fire doors usually arises in stair cores in taller blocks or refuse stores, and sometimes mixed-use commercial buildings. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Thatcham to keep escape routes protected throughout.

How a Thatcham job runs

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Thatcham?

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Thatcham as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Nearby areas we cover from Thatcham

We also cover towns near Thatcham, including Newbury (4.5 km away), Basingstoke and Reading. If your building is in RG19 or a neighbouring district, the service and pricing are the same.

Common questions