FD30 fire doors in Maghull, L31

Getting FD30 fire doors right in Maghull

Our FD30 fire doors service covers Maghull and the wider Merseyside area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

In and around Maghull, fire door work covers everything from care homes to small offices. We plan each job around the people who use the building.

In Maghull, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Maghull, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

What does a correct FD30 installation include?

A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.

Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.

What you get:

• Intumescent strips and smoke seals to the certification
• Certified FD30 or FD30S leaf, or full doorset
• Photo record, product data and certificate references at handover
• Frame-to-wall gap sealed with an evidenced material

Fire door law for Maghull properties

Fire doors in Maghull fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Maghull above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Where FD30 fire doors fit in Maghull

From HMOs to schools, the requirement for FD30 fire doors in Maghull comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

The steps on a Maghull installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Maghull?

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Maghull building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Around Maghull

Neighbouring towns such as Kirkby, Litherland, Ormskirk and Bootle are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions