What FD30 fire doors in Harwich should include
We provide FD30 fire doors in Harwich (CO12 and the surrounding postcodes), from the first survey through to a documented handover.
Harwich has a broad mix of buildings, including schools, houses with integral garages and care homes, and the same fire door principles apply to all of them.
In Harwich, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Harwich is sized for the opening, rather than trimmed beyond what its certification allows.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
Each installation includes:
- Photo record, product data and certificate references at handover
- Intumescent strips and smoke seals to the certification
- Survey of the opening, frame and existing ironmongery
- Overhead closer set to close and latch
Which fire door rules apply in Harwich?
In Harwich, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Harwich building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Harwich need FD30 fire doors?
The need for FD30 fire doors usually arises in schools or offices, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Harwich to keep escape routes protected throughout.
The steps on a Harwich installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Harwich?
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Harwich building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Harwich
Nearby towns we cover include Felixstowe, Ipswich and Clacton-on-Sea. Distance from Harwich does not change our guide prices, and the survey and quote are free.
Questions
Is Harwich within your coverage area?
It is. We cover Harwich in Essex and neighbouring towns such as Felixstowe. There is no charge for the survey.
What happens on a survey in Harwich?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.