FD30 fire doors in Wickford

FD30 fire doors in Wickford: what's involved

For property owners, landlords and managing agents in Wickford, we offer FD30 fire doors with one team for the survey, the product and the installation.

Wickford has a broad mix of buildings, including light industrial buildings, care homes and schools, and the same fire door principles apply to all of them.

For a mixed portfolio in Wickford, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Wickford is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

As standard, the work covers:

• Intumescent strips and smoke seals to the certification
• Frame-to-wall gap sealed with an evidenced material
• Overhead closer set to close and latch
• Certified FD30 or FD30S leaf, or full doorset

Which fire door rules apply in Wickford?

Fire doors in Wickford fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Wickford above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Which buildings in Wickford need FD30 fire doors?

From schools to care homes, the requirement for FD30 fire doors in Wickford comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

How a Wickford job runs

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Wickford

Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Wickford as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Covering Wickford and nearby

Wickford is about 15.5 km from Southend-on-Sea, and we cover both, along with nearby Pitsea and Rayleigh. Send us your postcode and we'll confirm survey dates.

Questions from Wickford