FD30 fire doors in Stanford-le-Hope

FD30 fire doors in Stanford-le-Hope: what's involved

We provide FD30 fire doors in Stanford-le-Hope (SS17 and the surrounding postcodes), from the first survey through to a documented handover.

In and around Stanford-le-Hope, fire door work covers everything from care homes to small blocks of flats. We plan each job around the people who use the building.

In Stanford-le-Hope, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Stanford-le-Hope is sized for the opening, rather than trimmed beyond what its certification allows.

What does a correct FD30 installation include?

A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.

Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.

Each installation includes:

• Frame-to-wall gap sealed with an evidenced material
• Photo record, product data and certificate references at handover
• Survey of the opening, frame and existing ironmongery
• Fire-tested hinges, latch or lock and intumescent pads

Which fire door rules apply in Stanford-le-Hope?

The rules that apply to fire doors in Stanford-le-Hope are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Stanford-le-Hope block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Which buildings in Stanford-le-Hope need FD30 fire doors?

The need for FD30 fire doors usually arises in HMOs or blocks of flats, and sometimes shops. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Stanford-le-Hope to keep escape routes protected throughout.

Our process in Stanford-le-Hope

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Stanford-le-Hope

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Stanford-le-Hope building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Stanford-le-Hope and nearby

Stanford-le-Hope is about 19.4 km from Southend-on-Sea, and we cover both, along with nearby Basildon and Pitsea. Send us your postcode and we'll confirm survey dates.

Common questions