FD30 fire doors for Witham buildings
If you need FD30 fire doors in Witham, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Witham protect escape routes in small blocks of flats, small offices and care homes alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In Witham, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Witham is sized for the opening, rather than trimmed beyond what its certification allows.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
As standard, the work covers:
- Intumescent strips and smoke seals to the certification
- Overhead closer set to close and latch
- Photo record, product data and certificate references at handover
- Survey of the opening, frame and existing ironmongery
The regulations behind fire doors in Witham
In Witham, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Witham building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Witham need FD30 fire doors?
The need for FD30 fire doors usually arises in schools or blocks of flats, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Witham to keep escape routes protected throughout.
How a Witham job runs
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Guide prices in Witham
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Witham building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Witham and nearby
Nearby towns we cover include Maldon, Braintree and Chelmsford. Distance from Witham does not change our guide prices, and the survey and quote are free.
Common questions
Is Witham within your coverage area?
It is. We cover Witham in Essex and neighbouring towns such as Maldon. There is no charge for the survey.
How quickly can you survey in Witham?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.

