Intumescent strips and smoke seals: our service in Aston
We provide intumescent strips and smoke seals in Aston (B6 and the surrounding postcodes), from the first survey through to a documented handover.
Buildings in and around Aston range from light industrial buildings to family homes after loft conversions and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We check that each door in your Aston building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Aston we replace them with the type and size the certification specifies.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
As standard, the work covers:
- Brush or blade smoke seals
- Check of gaps and closing after fitting
- Intumescent strips in frame or leaf edge
- Removal of damaged or painted seals
What the rules say for Aston
England's framework applies in Aston. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Aston, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Aston need intumescent strips and smoke seals?
The need for intumescent strips and smoke seals usually arises in HMOs or offices, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Aston to keep escape routes protected throughout.
The steps on a Aston installation
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Guide prices in Aston
If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Aston and neighbouring towns
Nearby towns we cover include Birmingham, Washwood Heath and Smethwick. Distance from Aston does not change our guide prices, and the survey and quote are free.
Questions
Is Aston within your coverage area?
It is. We cover Aston in West Midlands and neighbouring towns such as Birmingham. There is no charge for the survey.
Can you work from an existing inspection report for my Aston building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.