Intumescent strips and smoke seals in Wednesbury: what's involved
We provide intumescent strips and smoke seals in Wednesbury (WS10 and the surrounding postcodes), from the first survey through to a documented handover.
Wednesbury has a broad mix of buildings, including schools, family homes after loft conversions and small offices, and the same fire door principles apply to all of them.
Painted and missing seals are among the most common fire door defects nationally; in Wednesbury we replace them with the type and size the certification specifies. We check that each door in your Wednesbury building closes and latches against its new seals before signing it off.
Getting the specification right
The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.
Each installation includes:
- Intumescent pads to hinges and locks
- Brush or blade smoke seals
- Check of gaps and closing after fitting
- Removal of damaged or painted seals
The regulations behind fire doors in Wednesbury
England's framework applies in Wednesbury. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Wednesbury, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where intumescent strips and smoke seals fit in Wednesbury
Typical settings for intumescent strips and smoke seals include HMOs, offices and schools. In Wednesbury, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Wednesbury
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Budgeting for intumescent strips and smoke seals in Wednesbury
Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Wednesbury building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Wednesbury
Wednesbury is about 11.4 km from Birmingham, and we cover both, along with nearby Tipton and West Bromwich. Send us your postcode and we'll confirm survey dates.
Questions from Wednesbury
Do you work in Wednesbury?
Yes, we take on intumescent strips and smoke seals in Wednesbury and the surrounding area, including Tipton and West Bromwich. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Wednesbury building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.