Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Intumescent strips and smoke seals in Renfrewshire & Inverclyde

Replacing and fitting intumescent strips, smoke seals and pads to the door's certification. Available throughout Renfrewshire & Inverclyde, with a free survey and fixed written quote.

Quote for Renfrewshire & Inverclyde

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Getting intumescent strips and smoke seals right in Renfrewshire & Inverclyde

Whether your building is in Paisley, Greenock or a smaller place in Renfrewshire & Inverclyde, we can provide intumescent strips and smoke seals with the same evidence-led approach.

We check that each door in your Renfrewshire & Inverclyde building closes and latches against its new seals before signing it off. Seal replacement in Renfrewshire & Inverclyde can be combined with any other remedials on the same inspection report.

Renfrewshire & Inverclyde has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.

Why seals fail

Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.

Fire door law for Renfrewshire & Inverclyde properties

Renfrewshire & Inverclyde is in Scotland, which has its own system. Building work, including many fire door replacements, is governed by the Building (Scotland) Regulations 2004 and the Technical Handbooks, with Section 2 covering fire; where a building warrant is needed it comes from the local authority. In non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 set the duties.

The common parts of private blocks of flats largely sit outside Part 3 of the 2005 Act, so the fire risk assessment and housing obligations usually drive fire door work in residential buildings in Renfrewshire & Inverclyde.

What happens after you enquire

  1. Identify door certification and seal specification
  2. Remove failed seals and clean the grooves
  3. Fit new strips and seals to the specified positions
  4. Fit missing pads and lock linings
  5. Check the door closes and latches against the new seals
  6. Record the products fitted

Guide prices in Renfrewshire & Inverclyde

If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Questions

Do you provide intumescent strips and smoke seals across Renfrewshire & Inverclyde?

Yes. We cover all of Renfrewshire & Inverclyde, including Paisley and Greenock. Surveys and written quotes are free.

Can I just add intumescent strips to an ordinary door?

No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.

Do all fire doors need smoke seals?

Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.

Intumescent strips and smoke seals by town in Renfrewshire & Inverclyde

Book a free survey in Renfrewshire & Inverclyde

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote