Getting intumescent strips and smoke seals right in Renfrew
When you book intumescent strips and smoke seals in Renfrew, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Renfrew range from small offices to family homes after loft conversions and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We check that each door in your Renfrew building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Renfrew we replace them with the type and size the certification specifies.
Why seals fail
Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.
What you get:
- Removal of damaged or painted seals
- Brush or blade smoke seals
- Check of gaps and closing after fitting
- Identification of the specified seals
Fire door law for Renfrew properties
Scottish rules apply to fire doors in Renfrew. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.
Residential common parts in Renfrew are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.
Which buildings in Renfrew need intumescent strips and smoke seals?
From schools to HMOs, the requirement for intumescent strips and smoke seals in Renfrew comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Renfrew
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
What does intumescent strips and smoke seals cost in Renfrew?
As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Renfrew building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Renfrew
Nearby towns we cover include Clydebank, Paisley and Bearsden. Distance from Renfrew does not change our guide prices, and the survey and quote are free.
Common questions
Do you work in Renfrew?
Yes, we take on intumescent strips and smoke seals in Renfrew and the surrounding area, including Clydebank and Paisley. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.