Certified fire doorsets in Wellington

Getting certified fire doorsets right in Wellington

Our certified fire doorsets service covers Wellington and the wider Shropshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Wellington has a broad mix of buildings, including houses with integral garages, care homes and schools, and the same fire door principles apply to all of them.

Doorsets suit refurbishment programmes in Wellington, where several openings can be measured, ordered and fitted in one planned sequence. Pre-hung doorsets keep disruption down in occupied buildings in Wellington, with less cutting and fewer return visits.

Why choose a doorset over a door leaf?

A fire door's rating belongs to the assembly that was tested, not to the leaf on its own. When a certified leaf is hung in an old frame with mismatched hinges and seals, nobody can say with confidence how it will perform. A doorset arrives with the frame, gaps and ironmongery already matched, so the installer's job is to fix it correctly into the opening and seal it to the structure.

Doorsets also cut time on site, which matters in occupied buildings: less cutting, less dust and fewer return visits.

As standard, the work covers:

• Frame fixing and frame-to-wall gap sealing
• Certificate references and photo record per opening
• Pre-hung, pre-machined doorsets where available
• Doorset selection to rating, size and use

Which fire door rules apply in Wellington?

The rules that apply to fire doors in Wellington are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Wellington block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs certified fire doorsets in Wellington?

Landlords, managing agents, facilities teams and homeowners in Wellington can all commission certified fire doorsets from us. The usual settings are blocks of flats and schools and offices, though single doors for refurbishment programmes are just as welcome.

Our process in Wellington

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

What does certified fire doorsets cost in Wellington?

As a guide, budget £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. The figure for your Wellington building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Nearby areas we cover from Wellington

Neighbouring towns such as Telford, Shrewsbury, Stafford and Wolverhampton are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions