Certified fire doorsets in Shropshire: what's involved
Across Shropshire, from Telford to Shrewsbury, we survey, supply and fit certified fire doorsets for homes, blocks of flats and workplaces.
Every doorset we fit in Shropshire is handed over with its certificate reference and photographs of the frame fixing and gap sealing. Pre-hung doorsets keep disruption down in occupied buildings in Shropshire, with less cutting and fewer return visits.
Wherever your building is in Shropshire, the fire safety duties come from national rules, and our installation standard is the same.
How is a doorset installed?
The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.
What the rules say for Shropshire
England's framework applies in Shropshire. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Shropshire, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
The steps on a Shropshire installation
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
Prices for certified fire doorsets in Shropshire
Guide pricing for certified fire doorsets: £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. Volume work across several doors in one Shropshire building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Questions
Do you provide certified fire doorsets across Shropshire?
Yes. We cover all of Shropshire, including Telford and Shrewsbury. Surveys and written quotes are free.
How long do doorsets take to arrive?
Lead times depend on the manufacturer, size, finish and ironmongery. Standard sizes can be quick; bespoke sizes and finishes take longer. We give you the lead time with the quote and confirm it at order.
Can a doorset be fitted into an existing opening?
Usually, yes. Doorsets are made to fit the structural opening once the old frame is removed. We measure the opening on the survey so the doorset is made to the right size and the gaps to the wall stay within what the evidence allows.