What riser and cupboard fire doors in Wellington should include
Looking for riser and cupboard fire doors in Wellington? We supply and fit certified fire doors and components across Wellington and the wider Shropshire area, working from a free survey and a fixed written quote.
Around Wellington, small offices, light industrial buildings and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
While fitting riser doors in Wellington, we photograph any gaps in fire stopping we can see and pass them on to you. Riser and meter cupboard doors in Wellington blocks are easy to overlook until an inspection flags them.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
As standard, the work covers:
- Single and double flush configurations
- Signage as required
- Locks and keep-locked arrangements as specified
- Fire-rated riser and cupboard doorsets
Fire door law for Wellington properties
In Wellington, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Wellington building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs riser and cupboard fire doors in Wellington?
The need for riser and cupboard fire doors usually arises in office buildings or student accommodation, and sometimes blocks of flats. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Wellington to keep escape routes protected throughout.
Our process in Wellington
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
What does riser and cupboard fire doors cost in Wellington?
If you need a budget figure first, the guide for riser and cupboard fire doors is £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Wellington and nearby
Neighbouring towns such as Telford, Shrewsbury, Stafford and Wolverhampton are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Wellington
Is Wellington within your coverage area?
It is. We cover Wellington in Shropshire and neighbouring towns such as Telford. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.