Fire door ironmongery in Wellington, done to the evidence
From the TF1 postcode district outwards, we take on fire door ironmongery across Wellington for homes, blocks and workplaces.
Fire doors in Wellington protect escape routes in small offices, light industrial buildings and small blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Wellington we replace them with hardware covered by each door's evidence. Signage for fire doors in Wellington buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
On a typical job that means:
- Lever handles, pull handles and push plates
- Fire door signage
- Locks and latches covered by the evidence
- Bolts and selectors where specified
Which fire door rules apply in Wellington?
Fire doors in Wellington fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Wellington above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Wellington need fire door ironmongery?
Typical settings for fire door ironmongery include HMOs, offices and schools. In Wellington, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Wellington
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Guide prices in Wellington
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Wellington building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Wellington and nearby
Nearby towns we cover include Telford, Shrewsbury and Stafford. Distance from Wellington does not change our guide prices, and the survey and quote are free.
Common questions
Is Wellington within your coverage area?
It is. We cover Wellington in Shropshire and neighbouring towns such as Telford. There is no charge for the survey.
How quickly can you survey in Wellington?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.