Fire doorset supply and fit in Ashford (Kent)

Certified fire doorsets in Ashford (Kent), done to the evidence

If you need certified fire doorsets in Ashford (Kent), we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Around Ashford (Kent), high-street shops, schools and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

Pre-hung doorsets keep disruption down in occupied buildings in Ashford (Kent), with less cutting and fewer return visits. Every doorset we fit in Ashford (Kent) is handed over with its certificate reference and photographs of the frame fixing and gap sealing.

What does third-party certification mean?

Third-party certification means an independent body has checked the product's test evidence and audits the factory that makes it. Certified products carry a label or plug on the door edge and a certificate you can check. Buyers often look for schemes such as BWF Certifire or BM TRADA Q-Mark when choosing products. Our guide to certified doorsets explains how to read the label and certificate.

Each installation includes:

• Installation to the manufacturer's instructions
• Closer set-up and close-and-latch testing
• Doorset selection to rating, size and use
• Pre-hung, pre-machined doorsets where available

What the rules say for Ashford (Kent)

Fire doors in Ashford (Kent) fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Ashford (Kent) above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Ashford (Kent)

From new-build and conversion projects to blocks of flats, the requirement for certified fire doorsets in Ashford (Kent) comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

How a Ashford (Kent) job runs

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

Prices for certified fire doorsets in Ashford (Kent)

As a guide, budget £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. The figure for your Ashford (Kent) building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Ashford (Kent)

Nearby towns we cover include Faversham, Canterbury and Folkestone. Distance from Ashford (Kent) does not change our guide prices, and the survey and quote are free.

Questions from Ashford (Kent)