Certified fire doorsets: our service in Strood
If you need certified fire doorsets in Strood, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Strood protect escape routes in small offices, small blocks of flats and family homes after loft conversions alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Doorsets suit refurbishment programmes in Strood, where several openings can be measured, ordered and fitted in one planned sequence. Every doorset we fit in Strood is handed over with its certificate reference and photographs of the frame fixing and gap sealing.
How is a doorset installed?
The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.
On a typical job that means:
- Certificate references and photo record per opening
- Pre-hung, pre-machined doorsets where available
- Closer set-up and close-and-latch testing
- Frame fixing and frame-to-wall gap sealing
Fire door law for Strood properties
In Strood, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Strood building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Strood
Landlords, managing agents, facilities teams and homeowners in Strood can all commission certified fire doorsets from us. The usual settings are refurbishment programmes and new-build and conversion projects, though single doors for blocks of flats are just as welcome.
Our process in Strood
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
Prices for certified fire doorsets in Strood
If you need a budget figure first, the guide for certified fire doorsets is £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Strood
Nearby towns we cover include Rochester, Chatham and Gillingham. Distance from Strood does not change our guide prices, and the survey and quote are free.
Questions
Is Strood within your coverage area?
It is. We cover Strood in Kent and neighbouring towns such as Rochester. There is no charge for the survey.
What happens on a survey in Strood?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do doorsets come painted?
They can be supplied primed, factory painted, veneered, laminated or with a composite skin, depending on the product. Factory finishes avoid painting over seals and labels on site.
How long do doorsets take to arrive?
Lead times depend on the manufacturer, size, finish and ironmongery. Standard sizes can be quick; bespoke sizes and finishes take longer. We give you the lead time with the quote and confirm it at order.