Getting certified fire doorsets right in Folkestone
Our certified fire doorsets service covers Folkestone and the wider Kent area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
In and around Folkestone, fire door work covers everything from schools to family homes after loft conversions. We plan each job around the people who use the building.
Doorsets suit refurbishment programmes in Folkestone, where several openings can be measured, ordered and fitted in one planned sequence. Pre-hung doorsets keep disruption down in occupied buildings in Folkestone, with less cutting and fewer return visits.
How is a doorset installed?
The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.
On a typical job that means:
- Pre-hung, pre-machined doorsets where available
- Frame fixing and frame-to-wall gap sealing
- Certificate references and photo record per opening
- Installation to the manufacturer's instructions
What the rules say for Folkestone
The rules that apply to fire doors in Folkestone are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Folkestone block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Folkestone need certified fire doorsets?
From schools and offices to refurbishment programmes, the requirement for certified fire doorsets in Folkestone comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Folkestone
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
Guide prices in Folkestone
If you need a budget figure first, the guide for certified fire doorsets is £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Folkestone and neighbouring towns
Nearby towns we cover include Dover, Ashford (Kent) and Deal. Distance from Folkestone does not change our guide prices, and the survey and quote are free.
Questions from Folkestone
Do you cover CT20 and nearby postcodes?
Yes. We cover Folkestone including CT20, and nearby towns such as Dover and Ashford (Kent). The survey and written quote are free.
What happens on a survey in Folkestone?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do doorsets come painted?
They can be supplied primed, factory painted, veneered, laminated or with a composite skin, depending on the product. Factory finishes avoid painting over seals and labels on site.
Are doorsets more expensive than a leaf?
The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.