Fire exit doors: our service in Ashford (Kent)
Our fire exit doors service in Ashford (Kent) is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Ashford (Kent) range from industrial estates to low-rise blocks of flats and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Before quoting for an exit door in Ashford (Kent), we check whether it needs fire resistance, so you only pay for what the strategy requires. Exit doors in Ashford (Kent) can be fitted with outside access and alarm options that never stop people getting out.
Panic bars or emergency hardware?
Panic hardware to BS EN 1125, such as push bars, is designed for places where members of the public may be present and may not know the building. Emergency exit hardware to BS EN 179, such as push pads or levers, is for areas used by trained staff who know how the exit works. The right choice depends on who will be using the door in an emergency.
As standard, the work covers:
- Assessment of whether fire resistance is required
- Outside access devices and alarmed options
- Commissioning and handover
- Single and double exit doors in steel or timber
Rules and responsibilities in Ashford (Kent)
In Ashford (Kent), as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Ashford (Kent) building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where fire exit doors fit in Ashford (Kent)
The need for fire exit doors usually arises in hospitality venues or shops, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Ashford (Kent) to keep escape routes protected throughout.
The steps on a Ashford (Kent) installation
- Check the fire strategy and who uses the exit
- Select door type, rating and exit hardware
- Order doorset and hardware set
- Remove the existing door and prepare the opening
- Install, seal and weather the doorset
- Test exit operation, closers and security features
Budgeting for fire exit doors in Ashford (Kent)
If you need a budget figure first, the guide for fire exit doors is £1,100–£2,600 per exit doorset with hardware, supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Ashford (Kent)
We also cover towns near Ashford (Kent), including Faversham (18.7 km away), Canterbury and Folkestone. If your building is in TN24 or a neighbouring district, the service and pricing are the same.
Common questions
Is Ashford (Kent) within your coverage area?
It is. We cover Ashford (Kent) in Kent and neighbouring towns such as Faversham. There is no charge for the survey.
What happens on a survey in Ashford (Kent)?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do fire exit doors need closers?
Final exit doors often have closers for security and weather reasons. If the exit door is also a fire door, a closer is normally required to keep it shut.
Do fire exit doors have to open outwards?
Exit doors generally open in the direction of escape, especially where many people use them. Your fire strategy or risk assessment sets the requirement for each door.