Fire door ironmongery across Tyne and Wear

Fire door ironmongery in Tyne and Wear: what's involved

Whether your building is in Newcastle upon Tyne, Sunderland or a smaller place in Tyne and Wear, we can provide fire door ironmongery with the same evidence-led approach.

Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Tyne and Wear we replace them with hardware covered by each door's evidence. Signage for fire doors in Tyne and Wear buildings is fitted as part of the job, not as an afterthought.

Wherever your building is in Tyne and Wear, the fire safety duties come from national rules, and our installation standard is the same.

Common hardware defects

Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.

The regulations behind fire doors in Tyne and Wear

Fire doors in Tyne and Wear fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Tyne and Wear above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

What happens after you enquire

1. Identify the door's certification and hardware schedule
2. List items that need replacing
3. Supply matching hardware
4. Fit with correct pads and linings
5. Check operation, closing and latching
6. Record what was fitted

Guide prices in Tyne and Wear

As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Tyne and Wear building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Questions