Getting certified fire doorsets right in Tyne and Wear
For certified fire doorsets anywhere in Tyne and Wear, one team handles the survey, supply, installation and handover, covering Newcastle upon Tyne, Sunderland, South Shields and the rest of the county.
Doorsets suit refurbishment programmes in Tyne and Wear, where several openings can be measured, ordered and fitted in one planned sequence. Every doorset we fit in Tyne and Wear is handed over with its certificate reference and photographs of the frame fixing and gap sealing.
Managing agents, landlords, schools, care providers, businesses and homeowners in Tyne and Wear can all use one team for survey, supply, installation and evidence. We plan work around occupants and hand over a record for every door.
How is a doorset installed?
The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.
Fire door law for Tyne and Wear properties
England's framework applies in Tyne and Wear. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Tyne and Wear, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
The steps on a Tyne and Wear installation
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
Prices for certified fire doorsets in Tyne and Wear
If you need a budget figure first, the guide for certified fire doorsets is £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Common questions
Do you provide certified fire doorsets across Tyne and Wear?
Yes. We cover all of Tyne and Wear, including Newcastle upon Tyne and Sunderland. Surveys and written quotes are free.
Can a doorset be fitted into an existing opening?
Usually, yes. Doorsets are made to fit the structural opening once the old frame is removed. We measure the opening on the survey so the doorset is made to the right size and the gaps to the wall stay within what the evidence allows.
Are doorsets more expensive than a leaf?
The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.