Fire door ironmongery in Gateshead, done to the evidence
When you book fire door ironmongery in Gateshead, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Around Gateshead, low-rise blocks of flats, family homes after loft conversions and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
We supply ironmongery for Gateshead fire doors that matches each door's test evidence. Signage for fire doors in Gateshead buildings is fitted as part of the job, not as an afterthought.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
Each installation includes:
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
- Locks and latches covered by the evidence
- Lever handles, pull handles and push plates
Rules and responsibilities in Gateshead
Fire doors in Gateshead fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Gateshead above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door ironmongery fit in Gateshead
The need for fire door ironmongery usually arises in blocks of flats or HMOs, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Gateshead to keep escape routes protected throughout.
The steps on a Gateshead installation
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Prices for fire door ironmongery in Gateshead
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Gateshead building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Gateshead
Gateshead is about 1.5 km from Newcastle upon Tyne, and we cover both, along with nearby Felling and Gosforth. Send us your postcode and we'll confirm survey dates.
Common questions
Is Gateshead within your coverage area?
It is. We cover Gateshead in Tyne and Wear and neighbouring towns such as Newcastle upon Tyne. There is no charge for the survey.
How quickly can you survey in Gateshead?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.