Fire door ironmongery in Heavitree: what's involved
For property owners, landlords and managing agents in Heavitree, we offer fire door ironmongery with one team for the survey, the product and the installation.
Buildings in and around Heavitree range from light industrial buildings to houses with integral garages and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Heavitree we replace them with hardware covered by each door's evidence. Signage for fire doors in Heavitree buildings is fitted as part of the job, not as an afterthought.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
What you get:
- Fire-rated hinges, commonly grade 13
- Lever handles, pull handles and push plates
- Fire door signage
- Bolts and selectors where specified
Rules and responsibilities in Heavitree
In Heavitree, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Heavitree building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs fire door ironmongery in Heavitree?
Landlords, managing agents, facilities teams and homeowners in Heavitree can all commission fire door ironmongery from us. The usual settings are offices and schools, though single doors for blocks of flats are just as welcome.
What happens after you enquire
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Heavitree?
If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Heavitree
Neighbouring towns such as Exeter, Exmouth, Tiverton and Newton Abbot are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Is Heavitree within your coverage area?
It is. We cover Heavitree in Devon and neighbouring towns such as Exeter. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.