What fire door ironmongery in Exeter should include
From the EX4 postcode district outwards, we take on fire door ironmongery across Exeter for homes, blocks and workplaces.
Exeter has a broad mix of buildings, including purpose-built flats, GP surgeries and care homes, and the same fire door principles apply to all of them.
Signage for fire doors in Exeter buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Exeter we replace them with hardware covered by each door's evidence.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
As standard, the work covers:
- Intumescent pads and lock linings
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
- Locks and latches covered by the evidence
Which fire door rules apply in Exeter?
In Exeter, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Exeter building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Exeter need fire door ironmongery?
You are most likely to need fire door ironmongery if you look after HMOs, hotels or blocks of flats. Whatever the building in Exeter, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Exeter
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Exeter
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Exeter building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Exeter
Nearby towns we cover include Heavitree, Exmouth and Tiverton. Distance from Exeter does not change our guide prices, and the survey and quote are free.
Questions from Exeter
Do you cover EX4 and nearby postcodes?
Yes. We cover Exeter including EX4, and nearby towns such as Heavitree and Exmouth. The survey and written quote are free.
What happens on a survey in Exeter?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.