Fire door ironmongery for Barnstaple buildings
When you book fire door ironmongery in Barnstaple, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Barnstaple range from small offices to small blocks of flats and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Signage for fire doors in Barnstaple buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Barnstaple we replace them with hardware covered by each door's evidence.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
On a typical job that means:
- Fire door signage
- Locks and latches covered by the evidence
- Intumescent pads and lock linings
- Fire-rated hinges, commonly grade 13
What the rules say for Barnstaple
In Barnstaple, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Barnstaple building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Barnstaple
Typical settings for fire door ironmongery include offices, hotels and schools. In Barnstaple, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Barnstaple
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Barnstaple
Budget around from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. Our guide prices are the same in Barnstaple as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Barnstaple and neighbouring towns
Neighbouring towns such as Bideford, Tiverton, Exeter and Heavitree are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you cover EX31 and nearby postcodes?
Yes. We cover Barnstaple including EX31, and nearby towns such as Bideford and Tiverton. The survey and written quote are free.
What happens on a survey in Barnstaple?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.