Fire door ironmongery in Newton Abbot: what's involved
If you need fire door ironmongery in Newton Abbot, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Around Newton Abbot, family homes after loft conversions, small blocks of flats and small offices all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Newton Abbot we replace them with hardware covered by each door's evidence. Signage for fire doors in Newton Abbot buildings is fitted as part of the job, not as an afterthought.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
On a typical job that means:
- Locks and latches covered by the evidence
- Bolts and selectors where specified
- Fire door signage
- Fire-rated hinges, commonly grade 13
Which fire door rules apply in Newton Abbot?
The rules that apply to fire doors in Newton Abbot are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Newton Abbot block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door ironmongery in Newton Abbot?
You are most likely to need fire door ironmongery if you look after blocks of flats, schools or offices. Whatever the building in Newton Abbot, we survey each opening and tell you which doors need work and which do not.
The steps on a Newton Abbot installation
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Prices for fire door ironmongery in Newton Abbot
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Newton Abbot building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Newton Abbot and neighbouring towns
Newton Abbot is about 41.5 km from Plymouth, and we cover both, along with nearby Torquay and Paignton. Send us your postcode and we'll confirm survey dates.
Questions
Do you work in Newton Abbot?
Yes, we take on fire door ironmongery in Newton Abbot and the surrounding area, including Torquay and Paignton. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Newton Abbot building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.