FD60 fire doors: our service in Barnstaple
We provide FD60 fire doors in Barnstaple (EX31 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Barnstaple protect escape routes in houses with integral garages, light industrial buildings and small blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Before ordering FD60 doors for a Barnstaple building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Barnstaple we generally fit certified doorsets, so frame and leaf share the same test evidence.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
On a typical job that means:
- Load-rated hinges and correctly powered closer
- Intumescent and smoke seals as specified
- Check of the fire strategy rating for each opening
- Certified FD60 doorset or leaf with matching evidence
Which fire door rules apply in Barnstaple?
England's framework applies in Barnstaple. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Barnstaple, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs FD60 fire doors in Barnstaple?
Landlords, managing agents, facilities teams and homeowners in Barnstaple can all commission FD60 fire doors from us. The usual settings are stair cores in taller blocks and plant and boiler rooms, though single doors for mixed-use commercial buildings are just as welcome.
Our process in Barnstaple
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Barnstaple
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Barnstaple
Barnstaple is about 79.0 km from Plymouth, and we cover both, along with nearby Bideford and Tiverton. Send us your postcode and we'll confirm survey dates.
Questions
Do you work in Barnstaple?
Yes, we take on FD60 fire doors in Barnstaple and the surrounding area, including Bideford and Tiverton. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Barnstaple?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.