What fire door frames in Atherton should include
From the M46 postcode district outwards, we take on fire door frames across Atherton for homes, blocks and workplaces.
Atherton has a broad mix of buildings, including family homes after loft conversions, light industrial buildings and schools, and the same fire door principles apply to all of them.
Frame-to-wall gaps on Atherton jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Atherton survey.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
As standard, the work covers:
- Fixing at specified centres with packing
- Frame-to-wall gap sealing with evidenced materials
- Hardwood or certified frames to suit the door
- Architraves and making good
Which fire door rules apply in Atherton?
The rules that apply to fire doors in Atherton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Atherton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door frames in Atherton?
Landlords, managing agents, facilities teams and homeowners in Atherton can all commission fire door frames from us. The usual settings are schools and older blocks of flats, though single doors for offices are just as welcome.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Atherton
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Atherton
We also cover towns near Atherton, including Tyldesley (2.0 km away), Westhoughton and Leigh. If your building is in M46 or a neighbouring district, the service and pricing are the same.
Common questions
Is Atherton within your coverage area?
It is. We cover Atherton in Greater Manchester and neighbouring towns such as Tyldesley. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.