Getting intumescent strips and smoke seals right in Atherton
Our intumescent strips and smoke seals service covers Atherton and the wider Greater Manchester area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Atherton range from light industrial buildings to schools and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We check that each door in your Atherton building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Atherton we replace them with the type and size the certification specifies.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
What you get:
- Intumescent strips in frame or leaf edge
- Check of gaps and closing after fitting
- Identification of the specified seals
- Intumescent pads to hinges and locks
Which fire door rules apply in Atherton?
England's framework applies in Atherton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Atherton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Atherton need intumescent strips and smoke seals?
You are most likely to need intumescent strips and smoke seals if you look after HMOs, care homes or schools. Whatever the building in Atherton, we survey each opening and tell you which doors need work and which do not.
The steps on a Atherton installation
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Budgeting for intumescent strips and smoke seals in Atherton
As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Atherton building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Atherton and nearby
Atherton is about 17.6 km from Manchester, and we cover both, along with nearby Tyldesley and Westhoughton. Send us your postcode and we'll confirm survey dates.
Questions from Atherton
Is Atherton within your coverage area?
It is. We cover Atherton in Greater Manchester and neighbouring towns such as Tyldesley. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.