Fire door frames in Farnworth, done to the evidence
Our fire door frames service covers Farnworth and the wider Greater Manchester area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Around Farnworth, houses with integral garages, light industrial buildings and small blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Farnworth survey. Frame-to-wall gaps on Farnworth jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
On a typical job that means:
- Fixing at specified centres with packing
- Assessment of frame condition and compatibility
- Frame-to-wall gap sealing with evidenced materials
- Architraves and making good
What the rules say for Farnworth
In Farnworth, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Farnworth building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs fire door frames in Farnworth?
From older blocks of flats to offices, the requirement for fire door frames in Farnworth comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Farnworth
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Farnworth building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Farnworth
Nearby towns we cover include Walkden, Bolton and Radcliffe. Distance from Farnworth does not change our guide prices, and the survey and quote are free.
Questions
Do you work in Farnworth?
Yes, we take on fire door frames in Farnworth and the surrounding area, including Walkden and Bolton. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.