What fire door frames in Tyldesley should include
From the M29 postcode district outwards, we take on fire door frames across Tyldesley for homes, blocks and workplaces.
Buildings in and around Tyldesley range from small blocks of flats to small offices and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Tyldesley survey. Frame-to-wall gaps on Tyldesley jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
Each installation includes:
- Fixing at specified centres with packing
- Hardwood or certified frames to suit the door
- Frame-to-wall gap sealing with evidenced materials
- Photographs of fixing and sealing before covering
The regulations behind fire doors in Tyldesley
England's framework applies in Tyldesley. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Tyldesley, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs fire door frames in Tyldesley?
From schools to older blocks of flats, the requirement for fire door frames in Tyldesley comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Guide prices in Tyldesley
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Tyldesley building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Tyldesley and neighbouring towns
Tyldesley is about 15.7 km from Manchester, and we cover both, along with nearby Atherton and Leigh. Send us your postcode and we'll confirm survey dates.
Questions
Do you work in Tyldesley?
Yes, we take on fire door frames in Tyldesley and the surrounding area, including Atherton and Leigh. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Tyldesley building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.