Fire door closers in Hove, done to the evidence
When you book fire door closers in Hove, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Hove has a broad mix of buildings, including houses with integral garages, HMOs and high-street shops, and the same fire door principles apply to all of them.
A closer that fails to latch the door is one of the first things we put right on Hove fire doors. Free-swing closers are a practical option for Hove care homes and supported living.
Setting a closer properly
Closers have adjustments for closing speed, latching action and often backcheck. We set them so the door closes from any angle and engages the latch, without slamming. In England, Approved Document M guidance on opening force, no more than 30N for the first 30 degrees and 22.5N from 30 to 60 degrees at the leading edge, is a useful benchmark for usability. Our closers guide has more detail.
What you get:
- Assessment of door size, weight and use
- Close-and-latch test from full open
- Overhead, concealed or free-swing options
- Correctly powered closer to BS EN 1154
Fire door law for Hove properties
England's framework applies in Hove. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Hove, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Hove
Typical settings for fire door closers include HMOs, care homes and blocks of flats. In Hove, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Hove
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Budgeting for fire door closers in Hove
As a guide, budget £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT for fire door closers. The figure for your Hove building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Hove and neighbouring towns
Neighbouring towns such as Brighton, Portslade, Rottingdean and Burgess Hill are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Hove
Do you cover BN3 and nearby postcodes?
Yes. We cover Hove including BN3, and nearby towns such as Brighton and Portslade. The survey and written quote are free.
Can you work from an existing inspection report for my Hove building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
Why won't my fire door latch?
Usually the closer is out of adjustment or under-powered, or the latch and keep are misaligned. Both are normally quick to fix.