Getting fire door closers right in Burgess Hill
Our fire door closers service in Burgess Hill is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Burgess Hill range from small blocks of flats to houses with integral garages and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Free-swing closers are a practical option for Burgess Hill care homes and supported living. A closer that fails to latch the door is one of the first things we put right on Burgess Hill fire doors.
The most common fire door fault
A fire door that does not close is not doing its job. Closers fail because they are under-powered, out of adjustment, damaged, leaking or disconnected by people who find the door too heavy. Often the fix is a correctly sized closer, set up properly, rather than a new door.
What you get:
- Assessment of door size, weight and use
- Record of model and settings
- Overhead, concealed or free-swing options
- Correctly powered closer to BS EN 1154
What the rules say for Burgess Hill
Fire doors in Burgess Hill fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Burgess Hill above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door closers fit in Burgess Hill
From HMOs to offices, the requirement for fire door closers in Burgess Hill comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
From enquiry to handover in Burgess Hill
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
What does fire door closers cost in Burgess Hill?
As a guide, budget £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT for fire door closers. The figure for your Burgess Hill building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Burgess Hill and nearby
Neighbouring towns such as Haywards Heath, Portslade, Hove and Brighton are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Burgess Hill
Do you work in Burgess Hill?
Yes, we take on fire door closers in Burgess Hill and the surrounding area, including Haywards Heath and Portslade. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Burgess Hill building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
Do all fire doors need closers?
Most do. Exceptions include some doors kept locked shut and some doors within houses, depending on the fire strategy.