Fire door closers: our service in Seaford
If you need fire door closers in Seaford, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Seaford protect escape routes in small blocks of flats, small offices and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.
A closer that fails to latch the door is one of the first things we put right on Seaford fire doors. We set closers in Seaford buildings so doors close fully without becoming too heavy to open.
Setting a closer properly
Closers have adjustments for closing speed, latching action and often backcheck. We set them so the door closes from any angle and engages the latch, without slamming. In England, Approved Document M guidance on opening force, no more than 30N for the first 30 degrees and 22.5N from 30 to 60 degrees at the leading edge, is a useful benchmark for usability. Our closers guide has more detail.
On a typical job that means:
- Record of model and settings
- Adjustment of speed, latching and backcheck
- Close-and-latch test from full open
- Overhead, concealed or free-swing options
Which fire door rules apply in Seaford?
Fire doors in Seaford fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Seaford above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Seaford need fire door closers?
You are most likely to need fire door closers if you look after schools, HMOs or blocks of flats. Whatever the building in Seaford, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Guide prices in Seaford
As a guide, budget £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT for fire door closers. The figure for your Seaford building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Seaford
Seaford is about 18.2 km from Brighton, and we cover both, along with nearby Rottingdean and Eastbourne. Send us your postcode and we'll confirm survey dates.
Questions from Seaford
Is Seaford within your coverage area?
It is. We cover Seaford in East Sussex and neighbouring towns such as Rottingdean. There is no charge for the survey.
Can you work from an existing inspection report for my Seaford building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do all fire doors need closers?
Most do. Exceptions include some doors kept locked shut and some doors within houses, depending on the fire strategy.
Why won't my fire door latch?
Usually the closer is out of adjustment or under-powered, or the latch and keep are misaligned. Both are normally quick to fix.